shaped charge

In this paper, the design principle, powder formulation and technological processing of powdered metal liner of slug-free perforating shaped charge are introduced.

文章介绍了无杵堵射孔弹粉末药型罩的设计原则、粉末配方及工艺流程，并提供了试验研究结果，提出了研制中应注意的问题及设计原则。

Study on incising ability of linear shaped charge cutter at different connecting angle

线型聚能切割器在不同连接角度下切割能力的研究

A Simulation Study of Controlled Coyote Blast with Column and Strip-shaped Charge and Its Application in Highway Subgrade

条形药包硐室控制爆破仿真研究及其在高等级路基工程中的应用

A theoretical formula for particle velocity variation along shaped charge jets was derived based on the energy conservation of jet stretching.

从射流拉伸过程的能量关系出发，导出了相邻颗粒间速度差的理论公式。

Effects of Liner Curvature Radius on Formation of Double-Layered Spherical Segment Charge Liner into Tandem Explosively Formed Projectile ( EFP) Development of material in shaped charge liner for EFP

曲率半径对双层球缺罩形成串联爆炸成型弹丸的影响爆炸成形弹药型罩材料的现状和趋势

Series static armor-piercing tests were carried out to validate the performance of the proposed tandem shaped charge and in the experiment it penetrated a reinforce concrete.

在此基础上开展了系列串联聚能装药毁伤钢筋混凝土目标的静破甲实验。

Numerical Study on Penetration of Shaped Charge Jets into Concrete Targets Numerical Simulation on Forming and Penetration Process of Annular EFP

聚能装药侵彻混凝土靶板的数值模拟环形EFP成型及侵彻过程的数值模拟

By means of metallurgical analysis methods, macroscopical and microscopical characteristics for thin Si-Mn armour steel target subjected to penetration of real shaped charge jet have been investigated.

借助于冶金分析方法研究了硅锰装甲钢薄靶破甲弹坑的宏观和微观特征。

The Stability of a Shaped& charge Jet Carrying Surface Electrical Current

具有表面电流的金属射流稳定性分析

An installation for the simulated test of shaped charge with after effect was described.

绍了一种增效射孔弹模拟靶试验装置.

The liners manufactured by shear-forming process exhibit an ability of spin compensation, which can compensate for external rotation applied to a shaped charge.

旋压药型罩具有旋转补偿效应，可以部分抵消由于弹丸旋转而引起的射流旋转。

Threefold Design of Pressed Form Optimizing Technology Parameter for a Special shaped Charge

某异型威力件压制成型优化工艺参数的三次设计

For the later kinetic energy projectile following reliably, the hole perforated by precursory shaped charge is cylindrical as well.

根据破/爆型串联战斗部作用原理，为了使后级子弹可靠随进，前级聚能装药穿孔保持为圆柱形孔为好。

The effect of throw out blasting can be controlled effectively by adopting plane strip shaped charge in chamber blasting engineering practice.

在硐室爆破工程中应用平面条形药包可以有效地实现对抛掷的控制。

Jets parameters calculation of shaped charge with a shell

带壳聚能装药射流参数计算

The Penetration Mechanism of Linear Shaped Charge and Its Application in Underwater Engineering

线性聚能装药爆破在水下工程的应用

First, a specially shaped charge of chemical explosives surrounding a plutonium pit goes off.

第一, 围绕在钚核周围并装载于特殊形状里的化学爆炸物要被引爆.

Study and Analysis on Penetration of Shaped Charge into Rock and Soil Media; Analytic solution of the cylindrical cavity in elastic-viscoplastic materials with initial stresses

聚能装药对岩土介质侵彻机理研究与分析有初始原岩应力的弹粘塑性岩土介质中圆柱形孔扩张问题解析解

An experimental study of linear shaped charge flexible cutting ropes resistant to elevated temperatures

耐高温柔性切割索的实验研究

An installation for the simulated test of perforating shaped charge with after effect was described.

文章介绍了一种增效射孔弹模拟靶试验装置.

Design of Shaped Charge Based on Demand of Crater Diameter of Perforation Concrete

基于对混凝土侵彻孔径要求的聚能装药设计

The principle proposed in this paper is based on the process that shaped charge jet is cut off into fragments consecutively by the front flying plate.

提出了反应装甲设计原理：快速运动的上飞板，不断地把射流切割成段；

On the basis of the analysis figuration mechanism of jet, it is set up a sort of fair-new mathematical models to study influence and effect of shaped charge parameters and their structure.

研究工艺、结构参数对聚能装药作用效果的影响。通过分析射流形成机理，建立一种全新的用于计算轴对称结构聚能装药作用效果的数学模型。

Experimental study on Application of shaped charge to rock materials cutting

聚能爆破在石材切割应用中的试验研究

Calculation and Test on Flame-proof Time of Multistage-series Shaped Charge

多级串联聚能装药隔爆时间的计算与测试

Main structure parameters are designed using orthogonal graph research how parameters affect the penetration depth of linear shaped charge ( LSC).

为研究线性切割器结构参数对侵彻深度的影响，利用正交表设计了主要结构参数。

Studies on the relation between spin compensation and shear-forming parameters in SHEAR-FORMED shaped charge liners

旋压药型罩的旋转补偿效应与旋压参数关系的研究

A series of formulae on penetration depth of linear shaped charge and the calculation method on design coefficient of linear shaped cutter are provided.

提供了一套线性聚能装药侵彻深度计算公式及线性聚能切割器设计参数计算方法。

Investigation on copper materials of shaped charge liner for their dynamic behavior determination on math model of EPC control system for tension reel and its dynamic behavior analysis

国外铜药型罩材料动态特性研究卷取机EPC控制系统数学模型的确定及其动态特性分析